ADJ Starburst - User Manual

Rev. 9/15
User Instructions
STARBURST
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

Summary

User Instructions

Energy Saving Notice

Notice regarding energy saving practices for environmental protection.

General Information

Unpacking and Inspection

Details on inspecting the shipping carton and fixture for damage upon arrival.

Product Introduction

Overview of the Starburst fixture, its modes, and DMX channels.

Customer Support

Contact information and service hours for customer support.

Main Features

Highlights key features like LED type, DMX compatibility, and operating modes.

General Instructions

Read Manual First

Instructions for proper use and maintenance; keep manual for future reference.

Product Registration

Information on validating purchase and warranty through product registration.

Safety Precautions

Electrical and Fire Safety

Crucial safety warnings to prevent electrical shock, fire, and damage from misuse.

Environmental and Usage Safety

Warnings on moisture, liquids, cord condition, ground prong, and indoor use.

Setup and Configuration

Power Supply and Voltage

Details the automatic voltage sensing feature for universal power compatibility.

DMX-512 Protocol and Cabling

Explanation of DMX protocol, linking, data cable requirements, and 5-pin XLR connectors.

DMX Setup Details

5-Pin XLR Connectors

Details on using 5-pin XLR connectors with 3-pin DMX lines and cable conversion.

DMX Line Termination

Information on using cable terminators to avoid erratic behavior in long DMX cable runs.

System Menu Operations

DMX Addressing & Master;Slave

Setting DMX addresses and configuring Master/Slave modes for unit operation.

Operating Modes

Configuration of Show Mode, Sound Active mode, and sensitivity adjustments.

System Menu Advanced Settings

Fixture Settings

Control over LED display, display inversion, running time, and DMX signal loss behavior.

System Menu Maintenance

Maintenance Functions

Procedures for manual function testing, software version check, and unit reset.

Control Modes

Universal DMX Control

Guide to using a universal DMX-512 controller for programming and operation.

Master-Slave Operation

Instructions for linking multiple units for synchronized operation without a controller.

DMX Values and Traits

Channel Function Breakdown

Detailed breakdown of DMX channel functions and value ranges for operation.

Power and Maintenance

Power Cord Daisy Chain

Information on connecting multiple fixtures in a daisy chain using IEC power connectors.

Fuse Replacement

Step-by-step guide for safely replacing the unit's fuse.

Fixture Cleaning

Recommended procedures for cleaning the fixture's lenses, mirrors, and vents.

Warranty Information

Manufacturers Limited Warranty

Details of the manufacturer's limited warranty terms, coverage, and exclusions.

Product Specifications

Technical Specifications

Technical specifications including voltage, power, dimensions, weight, and warranty.

ADJ Starburst Specifications

Power

voltage	100v~240v/ 50~60Hz
power consumption	55W
fuse	2 Amp

Lighting

LEDs	5 x 15W 6-in-1 HEX LED
colors	RGBWYP
beam angle	1 Degree

Weight and Dimensions

dimensions	12.5”(L) x 12.5”(W) x 16.25”(H)
dimensions in mm	318mm x 318mm x 412.5mm
weight	8 Lbs. / 3.65 Kgs