Need help?Do you have a question about the ADJ VF SNOW FLURRY HO and is the answer not in the manual?
Information on how to get assistance for setup and operational questions.
Crucial warnings about electrical shock, fire risk, and user serviceable parts.
Details terms, conditions, and limitations of the product warranty.
Specifies warranty durations for different product categories.
Instructions on how to validate the product's one-year limited warranty.
Explains the sensor that automatically shuts off the pump when fluid is low.
Details the rear panel switch for controlling flake size via air pump speed.
Essential safety instructions for operating, handling, and maintaining the unit.
Ensure the unit's voltage matches the power source before operation.
Explains DMX as a communication protocol for lighting control.
Describes how to connect multiple DMX fixtures in a chain.
Specifies the type of DMX cables needed for operation.
Explains the use of a terminator to prevent erratic behavior on long DMX runs.
Step-by-step guide for unpacking, assembling, and preparing the snow machine.
How to connect and set the DMX address for 1-channel control.
Details DMX channel values and their corresponding functions for snow output.
Instructions for using the infrared remote for basic functions.
How to use the timer remote for interval-based snow output.
Important safety note regarding disconnecting power before handling remotes.
Steps to diagnose and resolve common operational issues like low output or noise.
Guidelines for storing the unit and performing regular maintenance.
Detailed technical data including model, voltage, dimensions, and capacity.
Information on how to get assistance for setup and operational questions.
Crucial warnings about electrical shock, fire risk, and user serviceable parts.
Details terms, conditions, and limitations of the product warranty.
Specifies warranty durations for different product categories.
Instructions on how to validate the product's one-year limited warranty.
Explains the sensor that automatically shuts off the pump when fluid is low.
Details the rear panel switch for controlling flake size via air pump speed.
Essential safety instructions for operating, handling, and maintaining the unit.
Ensure the unit's voltage matches the power source before operation.
Explains DMX as a communication protocol for lighting control.
Describes how to connect multiple DMX fixtures in a chain.
Specifies the type of DMX cables needed for operation.
Explains the use of a terminator to prevent erratic behavior on long DMX runs.
Step-by-step guide for unpacking, assembling, and preparing the snow machine.
How to connect and set the DMX address for 1-channel control.
Details DMX channel values and their corresponding functions for snow output.
Instructions for using the infrared remote for basic functions.
How to use the timer remote for interval-based snow output.
Important safety note regarding disconnecting power before handling remotes.
Steps to diagnose and resolve common operational issues like low output or noise.
Guidelines for storing the unit and performing regular maintenance.
Detailed technical data including model, voltage, dimensions, and capacity.
Power| voltage | 110v~50/60Hz or 220v~50/60Hz |
|---|---|
| fuse | 15A (110V) or 10A (220V) |
| tank capacity | 2.3 Liter |
Performance| spray distance | 8-10 Meters |
|---|---|
| fluid type | American DJ Snow Juice |
| duty cycle | Not to exceed 6 hours turned on. |
Weight and Dimensions| weight | 17.5 Lbs. / 8 Kgs |
|---|---|
| dimensions with bracket | 20" (L) x 12.5 (W) x 13.75” (H) / 510 x 316 x 349mm |
| dimensions without bracket | 20” (L) x 12.5 (W) x 10.5” (H) / 510 x 316 x 268mm |
To Next Page
