To Next PageTo Next Page
Need help?Do you have a question about the ADJ VBar Pak and is the answer not in the manual?
Information on the 2-year limited warranty and how to validate purchase.
Instructions on how to safely mount the VBar Pak fixture using clamps and safety cables.
Explanation of the DMX-512 protocol for fixture communication.
Guidance on linking multiple DMX fixtures for synchronized operation.
Specifications for DMX cables, including XLR connectors and wiring.
Overview of DMX control mode and available DMX channel modes for the fixture.
How to link multiple units for synchronized operation where one unit controls others.
Steps for daisy-chaining units and setting up master/slave relationships.
Select the desired DMX channel mode (1-8) for fixture control.
Procedure to set the DMX address for individual fixture control.
Guidance on operating the fixture via DMX controller, setting mode and address.
Step-by-step guide for safely replacing the fixture's fuse.
Solutions for common problems like no DMX response or no sound response.
Details warranty coverage, exclusions, and owner responsibilities.
Information on the 2-year limited warranty and how to validate purchase.
Instructions on how to safely mount the VBar Pak fixture using clamps and safety cables.
Explanation of the DMX-512 protocol for fixture communication.
Guidance on linking multiple DMX fixtures for synchronized operation.
Specifications for DMX cables, including XLR connectors and wiring.
Overview of DMX control mode and available DMX channel modes for the fixture.
How to link multiple units for synchronized operation where one unit controls others.
Steps for daisy-chaining units and setting up master/slave relationships.
Select the desired DMX channel mode (1-8) for fixture control.
Procedure to set the DMX address for individual fixture control.
Guidance on operating the fixture via DMX controller, setting mode and address.
Step-by-step guide for safely replacing the fixture's fuse.
Solutions for common problems like no DMX response or no sound response.
Details warranty coverage, exclusions, and owner responsibilities.
Power| voltage | 100V ~ 240V / 50~60Hz |
|---|---|
| power draw | 21W |
| fuse | 2 Amp |
Lighting Specifications| LEDs | 5 x 4W 4-in-1 LEDs |
|---|---|
| beam angle | 40 Degrees |
| colors | RGBA Color Mixing |
Weight and Dimensions| fixture weight | 4 lbs / 1.7 kg |
|---|---|
| system weight | 9 lbs / 4 kg |
| fixture dimensions | 22” (L) x 2.5” (W) x 3.5” (H) / 560 x 63 x 90 mm |
| VBar bag dimensions | 22” (L) x 6.5” (W) x 3.5” (H) / 560 x 165 x 90 mm |
