Need help?Do you have a question about the ADJ ECO UV BAR DMX and is the answer not in the manual?
Explains automatic voltage sensing for power connection.
Overview of the DMX-512 communication standard.
Guides on connecting multiple DMX fixtures in a chain.
Details required DMX cable specifications and types.
Information on using 5-pin XLR connectors and conversion.
How to manage the unit's LED display settings.
Controlling the fixture using a DMX controller.
Adjusting the fixture's strobe effect speed.
Adjusting the brightness of the fixture's output.
Configuring fade speed for UV effects.
Adjusting delay modes for lighting effects.
Recommendations for optimal wireless signal reception.
How to use the infrared remote control.
Details on remote control functions and buttons.
Explains automatic voltage sensing for power connection.
Overview of the DMX-512 communication standard.
Guides on connecting multiple DMX fixtures in a chain.
Details required DMX cable specifications and types.
Information on using 5-pin XLR connectors and conversion.
How to manage the unit's LED display settings.
Controlling the fixture using a DMX controller.
Adjusting the fixture's strobe effect speed.
Adjusting the brightness of the fixture's output.
Configuring fade speed for UV effects.
Adjusting delay modes for lighting effects.
Recommendations for optimal wireless signal reception.
How to use the infrared remote control.
Details on remote control functions and buttons.
Power| voltage | 100V ~ 240V, 50/60Hz |
|---|---|
| power consumption | 52W |
| fuse | 1 Amp |
Lighting| LEDs | 18 x 3W LEDs |
|---|---|
| beam angle | 120 Degrees |
| colors | UV |
Weight and Dimensions| weight | 5 lbs / 2.3 kg |
|---|---|
| length | 39.5 inches / 1000 mm |
| width | 2.5 inches / 60 mm |
| height | 4.75 inches / 115 mm |
To Next Page
