Do you have a question about the ADJ MEGA PAR and is the answer not in the manual?
Overview of the system, unpacking instructions, and customer support contact.
Essential warnings and cautions regarding electrical safety and product handling.
Guidance on operation, maintenance, and key product features.
Process for warranty validation and essential safety precautions for product use.
Instructions for system setup, DMX-512 protocol, and linking fixtures.
Specifications for DMX cables, XLR pinouts, and advice on line termination.
Introduction to the six operating modes: Sound-Active, Auto, Color Select, RGB Dimmer, Built-In Program, DMX.
Instructions for using Sound Active, Built-In Program, Auto Run, Color Select, and RGB Dimmer modes.
How to operate in DMX mode, select DMX channel modes, and set addresses.
Setup for Master-Slave, RFC remote control, and Foot Controller functions.
Detailed functions of the RFC remote control for system operation.
Channel values and functions for the 6-channel DMX mode.
Channel mapping and functions for 6 and 12 channel DMX modes.
Channel mapping and functions for the 15-channel DMX mode.
Procedures for fuse replacement, common troubleshooting, and unit cleaning.
Full terms and conditions of the manufacturer's limited warranty.
Warranty durations for different product types and series.
Key technical specifications for the Mega Par Profile System and Foot Controller.
Explanation of auto-sensing voltage and a disclaimer about manual changes.
Overview of the system, unpacking instructions, and customer support contact.
Essential warnings and cautions regarding electrical safety and product handling.
Guidance on operation, maintenance, and key product features.
Process for warranty validation and essential safety precautions for product use.
Instructions for system setup, DMX-512 protocol, and linking fixtures.
Specifications for DMX cables, XLR pinouts, and advice on line termination.
Introduction to the six operating modes: Sound-Active, Auto, Color Select, RGB Dimmer, Built-In Program, DMX.
Instructions for using Sound Active, Built-In Program, Auto Run, Color Select, and RGB Dimmer modes.
How to operate in DMX mode, select DMX channel modes, and set addresses.
Setup for Master-Slave, RFC remote control, and Foot Controller functions.
Detailed functions of the RFC remote control for system operation.
Channel values and functions for the 6-channel DMX mode.
Channel mapping and functions for 6 and 12 channel DMX modes.
Channel mapping and functions for the 15-channel DMX mode.
Procedures for fuse replacement, common troubleshooting, and unit cleaning.
Full terms and conditions of the manufacturer's limited warranty.
Warranty durations for different product types and series.
Key technical specifications for the Mega Par Profile System and Foot Controller.
Explanation of auto-sensing voltage and a disclaimer about manual changes.
| voltage | 90V ~ 240V / 50~60Hz |
|---|---|
| power_draw | 50W Max |
| fuse | 1 Amp |
| weight | 12 lbs / 5.1 kg |
|---|---|
| length | 47.25 inches / 1220 mm |
| width | 11 inches / 280 mm |
| height | 2.5 inches / 60 mm |
| weight | 3 lbs / 1.4 kg |
|---|---|
| length | 15.7 inches |
| width | 5.5 inches |
| height | 1.9 inches |












Loading...