Need help?Do you have a question about the ADJ Par Z100 3K and is the answer not in the manual?
Details the process of unpacking the fixture and checking for damage.
Provides an overview of the Par Z100 3K and its intended use.
Offers contact information and service hours for customer assistance.
Lists the key features and capabilities of the Par Z100 3K fixture.
Explains how to register the product's 2-year limited warranty.
Provides essential safety advice for handling the fixture during operation.
Details the auto-sensing voltage feature for power connection.
Explains the DMX protocol for intelligent fixture communication.
Describes how to connect multiple DMX fixtures in a chain.
Specifies the type of DMX data cables required for proper connection.
Instructions for setting the DMX address for fixture control.
Guide to choosing the desired DMX channel mode for operation.
Defines how the fixture behaves when DMX communication is lost.
Allows selection of different dimmer curve profiles for lighting effects.
Adjusts the dimming frequency for smoother or more responsive light output.
Enables adjustment of gamma correction for precise lighting control.
Option to invert the display orientation on the fixture's control panel.
Allows manual control of brightness, dimming, and strobe effects.
Initiates a self-test program to check fixture functionality.
Displays the current operating temperature of the fixture.
Shows the total running time accumulated by the fixture.
Displays the current software version installed on the fixture.
Restores the fixture to its original factory default settings.
Explains how to use a DMX controller for comprehensive fixture management.
Outlines the specific warranty duration for various ADJ product types.
Details the process of unpacking the fixture and checking for damage.
Provides an overview of the Par Z100 3K and its intended use.
Offers contact information and service hours for customer assistance.
Lists the key features and capabilities of the Par Z100 3K fixture.
Explains how to register the product's 2-year limited warranty.
Provides essential safety advice for handling the fixture during operation.
Details the auto-sensing voltage feature for power connection.
Explains the DMX protocol for intelligent fixture communication.
Describes how to connect multiple DMX fixtures in a chain.
Specifies the type of DMX data cables required for proper connection.
Instructions for setting the DMX address for fixture control.
Guide to choosing the desired DMX channel mode for operation.
Defines how the fixture behaves when DMX communication is lost.
Allows selection of different dimmer curve profiles for lighting effects.
Adjusts the dimming frequency for smoother or more responsive light output.
Enables adjustment of gamma correction for precise lighting control.
Option to invert the display orientation on the fixture's control panel.
Allows manual control of brightness, dimming, and strobe effects.
Initiates a self-test program to check fixture functionality.
Displays the current operating temperature of the fixture.
Shows the total running time accumulated by the fixture.
Displays the current software version installed on the fixture.
Restores the fixture to its original factory default settings.
Explains how to use a DMX controller for comprehensive fixture management.
Outlines the specific warranty duration for various ADJ product types.
The ADJ Par Z100 3K is an intelligent, zooming LED par fixture designed for various lighting applications, including theaters, studios, and retail stores. It operates as a standalone unit and can be controlled via DMX-512 protocol, offering flexibility in creating unique lighting programs. The fixture supports four DMX channel modes (1, 2, 3, and 4 channels), allowing for precise control over its functions.
The Par Z100 3K offers comprehensive control over its lighting output. Users can adjust the dimmer, fine dimmer, strobe, and select from six different dimmer curve modes: Standard, Stage 1, TV, Architectural, Theatre, and Stage 2. These dimmer curves provide varied fade times and ramp effects, allowing for smooth and tailored lighting transitions. The device also features gamma correction adjustment and dimming frequency adjustment, enabling further customization of the light output to suit specific environmental or artistic needs. For enhanced visual effects, especially in theatrical or event settings, the use of fog or special effects smoke is recommended to highlight the beam projections.
The fixture supports RDM (Remote Device Management) protocol, which allows for remote configuration and monitoring of the device. It includes 5-pin XLR input/output connections for DMX data and power input/output connections for power linking multiple units.
The Par Z100 3K's system menu provides a user-friendly interface for setting up and configuring the device.
The beam angle of the Par Z100 3K can be manually adjusted by sliding the beam angle adjuster located inside/in front of the lens. The adjustable beam angles include 9°, 15°, 20°, 25°, and 30°, providing versatility for different projection requirements.
For power linking, multiple Par Z100 3K units can be connected using the power input and output sockets. The maximum number of linkable fixtures is 15 at 120V and 25 at 230V. It is important to exercise caution when power linking different makes and models of lighting fixtures due to varying power consumption.
Regular maintenance is crucial for optimizing light output and ensuring the longevity of the Par Z100 3K.
The Par Z100 3K is designed for indoor use only, and operation outdoors voids all warranties. It is crucial to ensure proper ventilation, allowing at least 6 inches (15cm) of space between the device and any wall. The unit should always be mounted in a safe and stable manner, using a mounting clamp affixed to the provided bracket. A safety cable capable of holding at least 12 times the unit's weight should always be used. Installation should be performed by a professional and in a location out of reach of people. The housing can become extremely hot during operation, so direct contact with bare hands should be avoided.
General| Control type | Buttons |
|---|---|
| Display type | LED |
| Product type | Disco spotlight |
| Product color | Black |
| Suitable for indoor use | Yes |
| Power source | AC |
| Input voltage | 100 - 240 V |
| Input frequency | 50 - 60 Hz |
| Bulb power | 100 W |
| Light color | White |
| Bulb lifetime | 50000 h |
| Lamps quantity | 1 lamp(s) |
| Quantity | 1 |
| Dimming range | 0 - 100 % |
| Lighting modes | DMX |
| DMX channels quantity | 2 channels |
Weight and Dimensions| Depth | 491 mm |
|---|---|
| Width | 275 mm |
| Height | 224 mm |
| Weight | 3600 g |
| Ball diameter | - \ |
To Next Page
