ADJ FLAT PAR TRI7XS - User Manual

User Instructions
4/15
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
FLAT PAR TRI7XS

Summary

Safety Precautions

Electrical Shock and Fire Prevention

Warnings about electrical shock and fire risks, including cord handling and avoiding water.

Safe Operation Guidelines

Precautions for safe operation, ventilation, mounting, and environmental exposure.

Professional Servicing Requirements

Conditions under which the fixture should be serviced by qualified personnel.

Setup Procedures

Automatic Voltage Sensing

DMX-512 Communication Protocol

Introduces DMX-512 as a communication protocol for intelligent fixtures and controllers.

DMX Fixture Linking

Details how to link multiple DMX fixtures together for synchronized operation.

DMX Data Cable Specifications

Specifies the requirements for DMX data cables, including connector types and cable specifications.

Operating Instructions

Sound Active Mode Operation

DMX Mode Selection Procedure

Instructions on how to select the desired DMX channel mode for the fixture.

Overview of Operating Modes

Lists and briefly describes the five main operating modes: Sound-Active, Static Color, Auto, RGB, and DMX.

Master-Slave Setup

Master-Slave Connection Guide

How to connect multiple fixtures in a master-slave configuration using XLR cables.

ADJ LED RC Operation

Remote Control Functions Explained

DMX Control

Setting DMX Mode and Address

Guide to selecting DMX channel modes and setting the DMX address for the fixture.

1 Channel DMX Mode Functions

Lists the functions and color macros controlled by Channel 1 in 1-Channel DMX mode.

5 Channel DMX Mode Functions

2 Channel DMX Mode Functions

Explains the functions controlled by Channels 1 and 2 in 2-Channel DMX mode.

6 Channel DMX Mode Functions

3 Channel DMX Mode Functions

Details the functions controlled by Channels 1, 2, and 3 in 3-Channel DMX mode.

7 Channel DMX Mode Functions

4 Channel DMX Mode Functions

Installation and Power

Fixture Mounting Positions

Troubleshooting Common Issues

DMX Communication Problems

Solutions for when the fixture does not respond to DMX controller signals.

Sound Active Mode Issues

Product Warranty Details

Manufacturers Limited Warranty Terms

Product Specifications

Model, Voltage, and Auto-Sensing

LED, Beam Angle, and Power Specs

ADJ FLAT PAR TRI7XS Specifications

Power

voltage	100V ~ 240V/50~60Hz
power consumption	26.5W
fuse	1 Amp

Lighting

leds	7 x 3 Watt 3-in-1 LED’s
total power of leds	21 Watts
beam angle	40 Degrees

Weight and Dimensions

weight	6lbs./ 2.4Kgs.
length	10.75” (L) / 272mm
width	9” (W) / 230mm
height	4.5” (H) / 105mm