To Next PageTo Next PageWhat to do if my ADJ Lighting Equipment does not respond to sound?
If your ADJ Lighting Equipment isn't responding to sound, ensure that low frequencies (bass) are present, as these should trigger a reaction. Tapping the microphone or using quiet, high-pitched sounds might not activate the unit.
How to troubleshoot no light output from ADJ Lighting Equipment?
If there's no light output from your ADJ Lighting Equipment, first, verify that it's connected to a standard 120v wall outlet. Next, check the external fuse on the rear panel to see if it has blown. Lastly, ensure the fuse holder is completely and properly seated.
Advises against exposing the unit to rain or moisture to prevent shock/fire.
Warns about potential eye damage from looking directly into the light source.
Essential safety guidelines for installation and operation of the unit.
Precautions regarding electrical shock and fire hazards.
Guidelines for safe mounting and ensuring adequate ventilation.
Specifies indoor use only and cautions against exposure to liquids.
Guide to setting the DMX address for fixture control.
Instructions for configuring units in Master/Slave modes.
Using a DMX controller to manage chases, patterns, and dimming.
Explains DMX channel values for color, rotation, strobing, and shutter.
Troubleshooting steps for when the unit does not produce light.
Diagnosing issues with sound activation not working correctly.
Technical details including voltage, power, dimensions, and DMX channels.
Advises against exposing the unit to rain or moisture to prevent shock/fire.
Warns about potential eye damage from looking directly into the light source.
Essential safety guidelines for installation and operation of the unit.
Precautions regarding electrical shock and fire hazards.
Guidelines for safe mounting and ensuring adequate ventilation.
Specifies indoor use only and cautions against exposure to liquids.
Guide to setting the DMX address for fixture control.
Instructions for configuring units in Master/Slave modes.
Using a DMX controller to manage chases, patterns, and dimming.
Explains DMX channel values for color, rotation, strobing, and shutter.
Troubleshooting steps for when the unit does not produce light.
Diagnosing issues with sound activation not working correctly.
Technical details including voltage, power, dimensions, and DMX channels.
Power| voltage | 100V ~ 240V 50 ~ 60Hz |
|---|---|
| power draw | 27W |
| fuse | 7A (120v & 230v) |
Lighting| lamp | 1 x 10 Watt LED |
|---|---|
| colors | RGBW |
| dmx channels | 4 |
Weight and Dimensions| dimensions | 7.24”(L) x 12”(W) x 13.14”(H) |
|---|---|
| weight | 8.37 Lbs. / 3.8 kgs |
| beam angle | 65 Degree |
