ADJ UV LED Bar20 - User Manual

User Instructions
6/14
©2013 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
UV LED Bar20

Summary

UV LED Bar20 Safety Precautions

Electrical Safety

Warnings about exposure to rain/moisture, liquids, and using correct voltage outlets.

Operational Safety

Do not operate with frayed cords, remove covers, use in non-ventilated areas, or operate if damaged.

Mounting and Heat

Ensure proper ventilation, stable mounting, and keep away from heat sources.

Service and Maintenance

UV LED Bar20 Set Up

Power Supply

XLR Connector Wiring

DMX-512 Protocol

Explanation of DMX-512 as a universal communication protocol for intelligent fixtures.

DMX Linking

How to link multiple DMX fixtures together using a single controller and shortest cable paths.

Data Cable Requirements

Requirements for DMX-512 data cables, including type, connectors, and daisy-chaining.

UV LED Bar20 Operating Instructions

Strobing and Sound Active

How to select strobing styles, run programs, or activate sound-active mode and adjust speed.

DMX Mode Operation

Instructions for selecting and setting DMX modes (1, 2, 3 Channel) and addresses.

Dimming Curve

Static Mode

UV LED Bar20 Master-Slave Configuration

Master-Slave Connections and Settings

UV LED Bar20 DMX Channel Modes

1 Channel Mode

2 Channel Mode

3 Channel Mode

UV LED Bar20 Dimmer Curve Chart

UV LED Bar20 Fuse Replacement

UV LED Bar20 Trouble Shooting

Unit not responding to DMX

Troubleshooting steps for when the unit does not respond to DMX signals.

Unit does not respond to sound

UV LED Bar20 Manufacturers Limited Warranty

UV LED Bar20 Specifications

ADJ UV LED Bar20 Specifications

Power

voltage	100V ~ 240V
power draw	30W
fuse	1Amp

Lighting

LEDs	20 x 1W LEDs
colors	UV
DMX channels	3

Weight and Dimensions

weight	5lbs./ 2.45Kgs.
dimensions	15.4” (L) x 2.8” (W) x 6.9” (H) 391.5 x 70 x 174mm
beam angle	10 Degrees Vertical 40 Degrees Horizontal