ADJ Products, LLC www.adj.com Bubbletron Go Instruction Manual Page 4
• Battery Powered
• High velocity, high output fan
• Easy accessible front fluid tank
• High bubble output
• Low current draw
• Durable plastic casing
• Optional On/Off Remote Control
Bubbletron Go Features
Bubbletron Go Product Registration
The Bubbletron Go carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Bubbletron Go Battery Precautions
• Never charge batteries unattended. When charging batteries you
should always remain in constant observation to react to any
potential problems that may occur.
• If at any time you witness a battery starting to smoke, get hot, or
abnormal smell, discontinue the charging process immediately.
Disconnect the power supply and observe the unit in a safe place
for approximately 15 minutes. The battery could end up leaking
and the reaction with air may cause the chemicals to ignite, resulting
in a re.
• Neve store or charge battery pack inside your car in extreme tem-
peratures, since this could ignite a re.
• Neve transport or store battery pack in high temperature enviro-
ment for a long time.
ADJ Products, LLC www.adj.com Bubbletron Go Instruction Manual Page 3
Bubbletron Go Safety Precautions
• Keep the outside of this device dry at all times. Do not spill water
or other liquids into or on to your unit. Be sure all bubble juice is
kept inside the uid tray! To prevent re or shock hazard, do not
expose this product to rain or moisture.
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been fray-
ed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties
• During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in-
cluding ampliers) that produce heat.
• The xture should be serviced by qualied service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
Bubbletron Go General Instructions
To Previous Page
Loading...
