What to do if ADJ DJ equipment does not respond to sound?
If your ADJ DJ equipment isn't responding to sound, ensure that Sound Active mode is activated. Quiet or high-pitched sounds may not trigger the unit.
Why is my ADJ DJ equipment not responding to DMX?
If your ADJ DJ equipment isn't responding to DMX, verify that the DMX cables are properly connected and correctly wired, ensuring pin 3 is hot (note that on some devices, pin 2 may be hot). Also, confirm that all cables are connected to the correct connectors, paying attention to the input and output connections.
Details how to mount and secure the lighting fixture.
How to operate the fixture using DMX control.
Defines unit behavior when DMX signal is lost or interrupted.
How to link units for primary-secondary operation.
Explains the DMX-512 communication protocol.
How to connect multiple fixtures using DMX.
Specifies DMX cable types and construction.
How to set DMX starting addresses for fixtures.
Solutions for common operational problems.
Power| voltage | 100V ~ 240V/50~60Hz |
|---|---|
| power draw | 132W |
| fuse | 3 Amp |
Lighting| LEDs | 1 x 150W CW & WW 2 in 1 COB LED |
|---|---|
| beam angle | 80 Degrees (Optional 40° & 50° Lenses Included) |
| colors | Cool White & Warm White Mixing |
Weight and Dimensions| weight | 9 lbs./4.2Kgs |
|---|---|
| dimensions | 16.25” (L) x 9.75” (W) x 7.5” (H) 415 x 245 x 192mm |
To Next Page
