Need help?Do you have a question about the ADJ Eliminator Lighting VF1300 EP and is the answer not in the manual?
Read instructions carefully and check shipping carton for damage. Inspect units for damage and ensure all accessories are present.
Contact customer support for assistance. Returns require an R.A. number and proof of purchase for warranty service.
Details warranty validity, limitations, and owner's responsibilities for service, including voiding conditions.
Specifies warranty durations for non-L.E.D., L.E.D., and laser products, including battery limitations.
Emphasizes reading the manual, proper installation, avoiding water, not removing covers, and ensuring ventilation.
Highlights revolutionary heating element, wide-angle nozzle, long-life pump, fluid level sensor, and remote control.
Diagram identifying key parts like Fog Fluid Reservoir Cap, Fog Emitter, Power Switch, and Remote Control sockets.
Instructions for unpacking, placing the unit, filling fluid reservoir, connecting remote, and powering on.
Guide on connecting the wired remote, warm-up process, emitting fog, and adjusting output with the knob.
Details on using the wireless remote by plugging in the receiver and matching dip switches to remote buttons.
Explains the timer remote's LEDs (active timer, continuous fogging, manual fogging) and rotary knobs for duration/interval.
Procedure for safely replacing a blown fuse using a flat-head screwdriver and locating the spare fuse.
Guidance on proper storage in a cool area, running the device periodically, and using only water-based fog juice.
Advice on prolonged inactivity, storage conditions, and the critical importance of using approved fog juice.
Lists power, heating efficiency, ETS, LED indicators, shut-off sensor, warm-up/reheating times, output, fluid tank, remotes, and dimensions.
Diagrams showing product dimensions in inches and millimeters, along with power input labels for USA and Europe.
Read instructions carefully and check shipping carton for damage. Inspect units for damage and ensure all accessories are present.
Contact customer support for assistance. Returns require an R.A. number and proof of purchase for warranty service.
Details warranty validity, limitations, and owner's responsibilities for service, including voiding conditions.
Specifies warranty durations for non-L.E.D., L.E.D., and laser products, including battery limitations.
Emphasizes reading the manual, proper installation, avoiding water, not removing covers, and ensuring ventilation.
Highlights revolutionary heating element, wide-angle nozzle, long-life pump, fluid level sensor, and remote control.
Diagram identifying key parts like Fog Fluid Reservoir Cap, Fog Emitter, Power Switch, and Remote Control sockets.
Instructions for unpacking, placing the unit, filling fluid reservoir, connecting remote, and powering on.
Guide on connecting the wired remote, warm-up process, emitting fog, and adjusting output with the knob.
Details on using the wireless remote by plugging in the receiver and matching dip switches to remote buttons.
Explains the timer remote's LEDs (active timer, continuous fogging, manual fogging) and rotary knobs for duration/interval.
Procedure for safely replacing a blown fuse using a flat-head screwdriver and locating the spare fuse.
Guidance on proper storage in a cool area, running the device periodically, and using only water-based fog juice.
Advice on prolonged inactivity, storage conditions, and the critical importance of using approved fog juice.
Lists power, heating efficiency, ETS, LED indicators, shut-off sensor, warm-up/reheating times, output, fluid tank, remotes, and dimensions.
Diagrams showing product dimensions in inches and millimeters, along with power input labels for USA and Europe.
General| Model | Eliminator Lighting VF1300 EP |
|---|---|
| Category | Fog Machine |
| Power Consumption | 1300W |
| Fluid Type | Water-based fog fluid |
| Voltage | 120V |
| Output | 5000 cu.ft/min |
| Power Supply | AC 120V~60Hz |
To Next Page
