To Next PageTo Next Page
Need help?Do you have a question about the ADJ ENTOUR FAZE and is the answer not in the manual?
Provides toll-free customer support line and website for setup help and questions.
Highlights critical safety points like not aiming the unit at people and handling hot vapor.
Covers essential safety rules like saving packaging, avoiding spills, and proper ventilation.
Details precautions regarding electrical shock, including cord care and proper grounding.
Instructions for safe operation, including mounting, power connections, and service requirements.
Ensures the unit's voltage matches the local power outlet voltage for safe operation.
Explains DMX as a universal protocol for intelligent fixture communication.
Details how to link multiple DMX fixtures together for synchronized control.
Specifies the need for standard 3-pin XLR connectors and shielded cable for DMX operation.
Details the standard XLR pin configuration for DMX data transmission.
Explains the use of terminators for longer cable runs to prevent erratic behavior.
Details how to convert 5-pin XLR DMX cables for use with 3-pin DMX fixtures.
Identifies key components of the Entour Faze unit via a labeled diagram.
Provides important notes regarding the safe mounting and securing of the unit.
Instructions for unpacking the unit and filling the fog fluid reservoir.
Guides on plugging in the unit and allowing it to reach operating temperature.
Details the functions of the MENU, TIMER ON/OFF, UP, and DOWN buttons.
Explains how to set the DMX address and select the DMX channel mode.
Details settings for fog volume, timing interval, and duration for automated fogging.
Explains how to set and maintain the heater's temperature for quick fogging.
Important note on preserving timer settings and the cleaning process after use.
Instructions on how to activate or deactivate the fluid level detection feature.
Describes how the display indicates fluid status and low fluid warnings.
Guides on operating the unit for manual fog output and stopping the process.
Explains the 'PICL' cleaning process after manual fogging before shutdown.
Steps for plugging in the unit and initiating the power-on sequence.
Describes the warm-up period and how the unit resumes its last operating mode.
Explains how to control individual fixture traits using a DMX 512 controller.
Instructions for setting the DMX address for the unit.
Guides on selecting the desired DMX channel mode (1, 2, or 4 channels).
Instructions for connecting the DMX controller to the unit.
Details the functions and value ranges for the 1-channel DMX mode.
Details the functions and value ranges for the 2-channel DMX mode.
Details the functions and value ranges for the 4-channel DMX mode.
Identifies the parts of the wired remote control, including the jack, knob, and LEDs.
Instructions for cleaning or replacing the nozzle and the vent sponge.
Guidance on storing the unit, periodic use, and recommended fluid types.
Details the one-year limited warranty and the process for registration and service.
Troubleshooting steps for when the unit is connected but emits no smoke.
Advice for low fog output, pump noise, or complete lack of output, and when to seek service.
Covers warranty validity, service procedures, exclusions, and limitations of liability.
Specifies the limited warranty periods for different ADJ product types.
Lists key technical details including voltage, power, weight, dimensions, and fluid type.
Provides toll-free customer support line and website for setup help and questions.
Highlights critical safety points like not aiming the unit at people and handling hot vapor.
Covers essential safety rules like saving packaging, avoiding spills, and proper ventilation.
Details precautions regarding electrical shock, including cord care and proper grounding.
Instructions for safe operation, including mounting, power connections, and service requirements.
Ensures the unit's voltage matches the local power outlet voltage for safe operation.
Explains DMX as a universal protocol for intelligent fixture communication.
Details how to link multiple DMX fixtures together for synchronized control.
Specifies the need for standard 3-pin XLR connectors and shielded cable for DMX operation.
Details the standard XLR pin configuration for DMX data transmission.
Explains the use of terminators for longer cable runs to prevent erratic behavior.
Details how to convert 5-pin XLR DMX cables for use with 3-pin DMX fixtures.
Identifies key components of the Entour Faze unit via a labeled diagram.
Provides important notes regarding the safe mounting and securing of the unit.
Instructions for unpacking the unit and filling the fog fluid reservoir.
Guides on plugging in the unit and allowing it to reach operating temperature.
Details the functions of the MENU, TIMER ON/OFF, UP, and DOWN buttons.
Explains how to set the DMX address and select the DMX channel mode.
Details settings for fog volume, timing interval, and duration for automated fogging.
Explains how to set and maintain the heater's temperature for quick fogging.
Important note on preserving timer settings and the cleaning process after use.
Instructions on how to activate or deactivate the fluid level detection feature.
Describes how the display indicates fluid status and low fluid warnings.
Guides on operating the unit for manual fog output and stopping the process.
Explains the 'PICL' cleaning process after manual fogging before shutdown.
Steps for plugging in the unit and initiating the power-on sequence.
Describes the warm-up period and how the unit resumes its last operating mode.
Explains how to control individual fixture traits using a DMX 512 controller.
Instructions for setting the DMX address for the unit.
Guides on selecting the desired DMX channel mode (1, 2, or 4 channels).
Instructions for connecting the DMX controller to the unit.
Details the functions and value ranges for the 1-channel DMX mode.
Details the functions and value ranges for the 2-channel DMX mode.
Details the functions and value ranges for the 4-channel DMX mode.
Identifies the parts of the wired remote control, including the jack, knob, and LEDs.
Instructions for cleaning or replacing the nozzle and the vent sponge.
Guidance on storing the unit, periodic use, and recommended fluid types.
Details the one-year limited warranty and the process for registration and service.
Troubleshooting steps for when the unit is connected but emits no smoke.
Advice for low fog output, pump noise, or complete lack of output, and when to seek service.
Covers warranty validity, service procedures, exclusions, and limitations of liability.
Specifies the limited warranty periods for different ADJ product types.
Lists key technical details including voltage, power, weight, dimensions, and fluid type.
Power| voltage | 120v or 230V, 50/60Hz |
|---|---|
| heater power | 450W |
| power consumption | 465W |
Operating Specifications| warm up time | 45 Seconds |
|---|---|
| output | 4, 000 cubic feet per minute |
| duty cycle | Not to exceed 6 hours turned on |
Weight and Dimensions| weight | 10 Lbs. / 4.5 Kgs |
|---|---|
| dimensions | 15.5" (L) x 17” (W) x 10” (H) |
| dimensions (mm) | 202 x 414 x 303mm |
