ADJ ENTOUR SNOW - User Manual

User Instructions
10/17
ENTOUR SNOW
©2017 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
Date
Document
Version
Software
Version
DMX
Channel
Mode
Notes
>
DOCUMENT VERSION
Please check www.adj.com for the latest revision/update of this guide.
07/13/17
1 1.01
1/3/5 Initial Release

Summary

Environmental Notice

Product Introduction

Customer Support and Service

Contact details and hours for technical assistance and product service.

Safety Information

Critical Safety Warnings

Essential safety guidelines to prevent hazards during operation.

When to Seek Professional Service

Conditions indicating the need for qualified service personnel.

DMX Control and Connectivity

Power Supply Voltage Check

Verify the unit's voltage requirement matches the local power outlet.

Understanding DMX-512 Protocol

Explanation of DMX communication for intelligent lighting control.

DMX Cable Requirements

Specifications for standard 3-pin XLR DMX data cables.

XLR Pinout Configuration

Diagram and explanation of 3-pin XLR connector pin assignments.

DMX Line Termination Best Practices

How to use terminators to ensure stable DMX signal transmission.

5-Pin to 3-Pin XLR DMX Conversion

Guide for adapting 5-pin DMX connectors to 3-pin systems.

Product Layout and Dimensions

Component Identification Diagram

Labeled diagram identifying all external parts of the unit.

Physical Dimensions and Measurements

Detailed measurements and visual representation of the unit's size.

General Setup and Controls

Initial Setup Procedures

Step-by-step guide for preparing the Entour Snow for use.

Control Panel Button Functions

Explanation of each button on the unit's control interface.

Operating Modes

Timer Operation Guide

Instructions for setting up and using the timer function.

Manual Operation Guide

How to manually control snow output and fan speed.

DMX Channel Modes and Traits

Setting DMX Address and Channel Mode

Procedures for configuring DMX address and selecting channel modes.

DMX Traits: 1 Channel Mode

DMX values and functions for the 1-channel control mode.

DMX Traits: 3 Channel Mode

DMX values and functions for the 3-channel control mode.

DMX Traits: 4 Channel Mode

DMX values and functions for the 4-channel control mode.

Product Maintenance

Fluid System Maintenance

Cleaning and maintaining the fluid nozzle and lines.

Air Filter Maintenance

Instructions for cleaning and replacing the air filter.

Warranty and Storage

Warranty Registration Process

Steps to register your product for warranty coverage.

Machine Storage Guidelines

Recommendations for proper storage to preserve the unit's lifespan.

Manufacturers Limited Warranty Details

Comprehensive information on the product's limited warranty terms.

Warranty Period Summary

Overview of the warranty duration for ADJ products.

Technical Specifications

Product Specifications Table

Detailed technical data including model, voltage, power, and dimensions.

ADJ ENTOUR SNOW Specifications

Power

voltage	120v or 230V, 50/60Hz
power consumption	1250W
breaker	NFB 16A (120V) / 9A (230V)

Performance

tank capacity	5.6 Liter
snow distance	12M
snow height	10M

Weight and Dimensions

weight	30 Lbs. / 13.5 Kgs
dimensions	15.39" x 21.65” x 10.11” / 391 x 550 x 257 mm