ADJ Products, LLC - www.adj.com - Entour Snow Instruction Manual Page 14
Entour Snow Maintenance Entour Snow Maintenance
The uid cannot get dirty. Always make sure the cap is clean
and the snow uid line. Periodically nozzle maybe come
clogged by impurities contact ADJ customer service for a
replacement nozzle.
With prolonged use, the air lter can accumulate dust. Perodically
remove the uid tank by unscrewing the cap. Lift up the tank
holder, remove the tank and remove the magnetic air lter to
clean. After cleaning, be sure to dry the air lter, and reinstall the
lter. If you would like to replace the air lter, contact ADJ
customer service.
ADJ Products, LLC - www.adj.com - Entour Snow Instruction Manual Page 15
The air lter is adsorbed on
the mesh of the inner air inlet
Magnetic air lter
Exit black cloth
Core spring
Nozzle
Snip the black zip tie band located around the spring
and the cloth at the end. Remove the spring and the
cloth.
Metal nozzle
Snip the black zip tie band on the
metal nozzle and remove the nozzle
for cleaning.
Method of removing the core
spring and exit black cloth
Method of removing
the metal nozzle
To remove the cloth and spring carefully snip the black zip tie
that secures the cloth in the place. Try not to cut through the
cloth. Remove the cloth and and spring. Clean cloth and spring
and reinstall with zip tie security.
To Next Page
Loading...
