SAFETY INSTRUCTIONS AND GUIDELINES
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this
manual. ADJ PRODUCTS LLC is not responsible for injury and/or damages resulting from the
misuse of these devices due to the disregard of the information printed in this manual. Only qualified
and/or certified personnel should perform installation of these devices and only the original rigging
parts included with these devices should be used for installation. Any modifications to these devices
and/or the included mounting hardware will void the original manufactures warranty and increase the
risk of damage and/or personal injury.
PROTECTION CLASS 1 – DEVICES MUST BE PROPERLY GROUNDED
THERE ARE NO USER SERVICEABLE PARTS INSIDE THESE DEVICES. DO NOT
ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR
MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO
THESE DEVICES AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND
GUIDELINES IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE
NOT SUBJECT TO ANY WARRANTY CLAIMS AND/OR REPAIRS.
DO NOT PLUG THIS UNIT INTO A DIMMER PACK!
DO NOT REMOVE THE COVER UNDER ANY CONDITIONS!
KEEP UNIT UPRIGHT!
NEVER OPERATE THIS UNIT WITH THE COVER REMOVED!
UNPLUG POWER DURING LONG PERIODS OF NON-USE
ENSURE TANK AND COOLER ARE EMPTY BEFORE STORAGE OR TRANSPORT!
DISCONNECT POWER BEFORE ADDING WATER OR PERFORMING MAINTENANCE!
INDOOR / DRY LOCATIONS USE ONLY!
DO NOT EXPOSE DEVICES TO RAIN AND/OR MOISTURE!
PLACE UNIT IN A WELL VENTILATED AREA.
ALLOW 40” (100CM) ABOVE AND AROUND THE UNIT FOR PROPER VENTILATION
USE CLEAN WATER AS IMPURITIES MAY RESULT IN DAMAGE TO THE UNIT.
USE THIS UNIT ON LEVEL SURFACES! LOCK WHEELS TO KEEP FROM MOVING!
THE WATER IN THE TANK CAN REACH AS HIGH AS 185°F (85°C). BEFORE
DRAINING, WAIT FOR THE WATER TEMPERATURE TO REACH BELOW 86°F (30°C).
ALLOW UNIT TO COOL DOWN BEFORE CLEANING OR SERVICING.
SEE FOLLOWING PAGE FOR DRY ICE HANDLING, STORAGE AND USAGE WARNINGS.
To Next Page
Loading...
