T ROUBLE SHOOTING TIPS
The stand seems unstable.
1. Check to ensure that all knobs and hardware are tight and secure.
2. If the stand is in an unsuitable location (uneven or unstable surface), reposition the stand.
3. Additional measures (i.e. sandbags or security cables) may be needed to secure the stand.
The T-Bar or Truss I-Beam does not stay at the desired height.
1. Check to ensure that all knobs and hardware are tight and secure.
FREQUENTLY ASKED QUESTIONS
Listed below are a few answers to common questions users may have.
1. What are the dimensions of the T-Bar?
The dimensions are .4 x 1.57 x 47.2” (20 x 40 x 1,200 mm).
2. What is weight capacity of the stand?
Each stand has a weight capacity of 100 lbs. (45.4 kg)
The weight capacity of the system is 200 lbs. (90.7 kg) when evenly distributed.
3. What is the diameter of the T-Bar?
The T-Bar is 20 x 40 mm with a diagonal of 44.7mm (1.76”)
4. What is the maximum height of the stand?
The minimum extended height is 57.1” (1,450) while the maximum extended height of the stand is
118.1” (3,000 mm.)
5. Are additional stands, clamps or accessories available?
Yes. A variety of stands and accessories are available at www.adj.com.
OPTIONAL ACCESSORIES
To Next Page
Loading...
