Quad Phase HP Installation
The unit should be mounted using a mounting clamp (not provided), afxing it to the
mounting bracket that is provided with the unit. Always ensure that the unit is rmly
xed to avoid vibration and slipping while operating. Always ensure that the structure to
which you are attaching the unit is secure and is able to support a weight of 10 times the
unit’s weight. Also, always use a safety cable that can hold 12 times the weight of the
unit when installing the xture. The equipment must be installed by a professional, and it
must be installed in a place where it is out of the reach of people’s grasp.
ADJ Products, LLC - www.adj.com - Quad Phase HP - User Manual - Page 8
To Next Page
Loading...
