EasyManua.ls Logo

ADJ UB 6H - Page 14

ADJ UB 6H
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ADJ Products, LLC - www.adj.com - UB 6H User Manual Page 14
UB 6H ADJ UC IR/Airstream IR Operation
The UC IR infrared remote gives you control of various functions. To control the fixture you must aim
the remote at the front of the fixture and be within the maximum range of 30 feet. To use the ADJ UC
IR you must first activate the fixture’s infrared sensor, as described in the Operating Instructions
section of this manual.
The Airstream IR remote transmitter plugs into the headphone jack of your iOS phone or tablet. To
control your IR fixture you must raise the volume to the maximum on your iOS phone or tablet and
aim the transmitter at the fixture sensor. Maximum range is 15 feet. After you have purchased the
Airstream IR transmitters, the app is a free download from the app store for your iOS phone or tab-
let. The app comes with 3 pages of control depending on the fixture you are using. Please see below
for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the
normal state.
FULL ON - Press this button to fully illuminate the unit. Press this button again to return the unit to
its last mode of operation.
FADE/GOBO - This button activates fade mode. Use buttons 1-3 to adjust the fade speed.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the output intensity.
STROBE - Press this button to activate strobing. Use buttons 1-4 to adjust the strobe speed, with
“1” being the slowest, and “4” being the fastest. Press STROBE button again to stop strobing.
COLOR - Press this button to activate color mode. Use buttons 1-9 to find your desired color.
1-9 - Use buttons 1-9 to select your desired color when color mode is active or your desired pro-
gram when show mode is active. Use buttons 1-4 to select you desired strobe rate when strobing is
active.
SOUND ON & OFF - Use the buttons to activate and deactivate sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-9 to select your desired show.
Press this button twice for show 10. Press button 1 twice for show 11.

Related product manuals