8
VFTR13 Timer Remote (Sold Separately): Start by connecting the remote to the fog machine. The
remote’s timer function allows fog to be emitted at designated intervals. The remote has three (3)
L.E.D.s that indicate dierent functions.
• The yellow LED on the left indicates that the timer is active.
• The red LED indicates that continuous fogging is active.
• The green LED on the right is for manual fogging. Wait for the green LED to light up, then press
the button to commence manual fogging.
The remote also contains two rotary knobs.
• The Duration knob sets the timer duration (length of time for fog output).
• The Interval knob sets the fog output intervals (length of time between fog output bursts).
Caution: Disconnect the unit from power before removing or replacing the remote control unit.
TIMER REMOTE
To Next Page
Loading...
