5. How to control the fixture
There are three ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
C. Auto Run
A. Universal DMX controller
Connect the fixtures to a universal DMX controller and set the DMX starting address for each fixture.
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a controller. In Master/Slave mode, the
first fixture will control the others to give an automatic, sound activated, synchronized light show. This function is
good when you want an instant show. The first fixture it’s DMX input cable will have nothing connect it, and the
other fixtures will be set in slave mode automatically. Their DMX input cables connect the last fixture DMX output
cable (daisy chain). Any fixture can act as a Master or as a Slave
6. DMX512 Configuration
5 Channel Mode:
To Next Page
Loading...
