Need help?Do you have a question about the Adlee Powertronic Adleepower AS2 and is the answer not in the manual?
General precautions for using the inverter, including checking covers, manual modifications, and user modifications.
Explains the meaning of Warning and Caution symbols used in the manual for safety.
Explanation of the information provided on the inverter's model nameplate.
Detailed specifications for AS1 and AS2 single-phase input inverter models.
Detailed specifications for AS2 and AS4 three-phase input inverter models.
Diagram illustrating the main circuit connections for power, motor, and braking resistor.
Details the wiring and function of control circuit terminals for various operations.
Explains DIP switch and jumper settings for configuring inverter functions.
Configures the initial motor speed setting, with options for US and European versions.
Enables or disables changes to other parameter settings to prevent accidental modification.
Sets the time for the motor to accelerate from minimum to 60Hz frequency.
Sets the time for the motor to decelerate from 60Hz to the minimum frequency.
Adjusts the carrier frequency, affecting motor noise and efficiency.
Sets the limit for the energy used during dynamic braking.
Selects between European and USA versions of the inverter's software.
Configures non-linear acceleration/deceleration profiles (S-curve).
Details error codes related to internal protection, CPU, and self-test failures.
Details error codes related to parameter locking, direction limits, and analog signal input.
Safety steps to take before performing any maintenance on the inverter.
General precautions for operating the inverter, including wiring, noise, motor compatibility, and circuit breakers.
Table listing common fault symbols (PF01, PF02, etc.), causes, check points, and suggested remedies.
Demonstrates how to set up multistage speed control using a variable resistor.
Illustrates the configuration for normal and jog operation modes using external switches.
Shows how to configure three distinct speed settings using external components.
Explains setting up a master/slave driver system using analog signal inputs.
Details load characteristics, speed, torque, power supply, and other factors for inverter selection.
Recommendations for selecting and using optional braking resistors with the inverter.
Wiring diagrams for single-phase and three-phase connections to the inverter terminals.
Information and specifications for the optional F300 remote operator.
Details about the hardware and software versions of the inverter.
General| Brand | Adlee Powertronic |
|---|---|
| Model | Adleepower AS2 |
| Category | Inverter |
| Language | English |
To Next Page