Adlee Powertronic Adleepower AS4

Need help?

Do you have a question about the Adlee Powertronic Adleepower AS4 and is the answer not in the manual?

Summary

Preface

General Precautions

Key safety guidelines including cover replacement, manual handling, and contacting representatives for issues.

Safety Symbols

Explanation of WARNING and CAUTION symbols used to denote potential hazards and their consequences.

1. Receiving

2. Specifications

Single Phase Input Port

Technical specifications table detailing voltage, current, capacity, and other parameters for single-phase input models.

3 Phase Input Port

Technical specifications table detailing voltage, current, capacity, and other parameters for three-phase input models.

3. Dimension Drawings

4. Installation

5. Description of Terminals

Main Circuit Terminal Connections

Diagram and table detailing the connections for the main power circuit terminals (L1, L2, L3, U, V, W, P, PR).

Control Circuit Terminals

Diagram and table explaining the functions of control circuit terminals (VCC, FA1, FA2, GND, B, C, FWD, REV, CF1, CF2, FT1, FT2, MT, H, COM).

Hardware Setting Description

Explanation of DIP switch (SW1) and jumper setup (JP1) for configuring inverter hardware settings.

6. Digital Operation Panel

7. Functions Description

Function Setting Procedures

Detailed guide on setting various inverter functions (CD00-CD57) via the operation panel, including parameter lock and speed settings.

Operation Key-in Sequence Examples

Step-by-step examples demonstrating how to change specific inverter parameters like acceleration time and maximum frequency limit.

8. Display Error Codes

Inverter Self-Checking Errors

List and explanation of error codes related to internal protection, CPU, noise, and self-test failures.

Operation Errors

List and explanation of error codes indicating operational issues like parameter locked, motor direction, or analog signal problems.

9. Hardware Protective Functions

10. Precautions

Prior to Maintenance

Essential safety checks and procedures before performing any maintenance on the inverter, including power off and waiting times.

Application Precautions

Guidelines for safe and optimal inverter operation, covering wiring, noise, motor compatibility, and circuit breaker installation.

11. Troubleshooting

12. Application Examples

Master; Slave Driver System

Detailed setup for master/slave driver configuration using FA1 as the second speed signal input terminal.

13. Inverter Selection

14. Appendix

Optional Braking Resistor

Recommendations for braking resistor resistance and capacity (W) based on inverter model and deceleration time.

Terminals Wiring Diagram

Detailed wiring diagrams for single-phase and three-phase connections, including control and main circuit terminals.

F300 Remote Operator

Information and specifications for the F300 remote operator, including its compatibility with remote control inverters.

Version Information

Details on hardware and software versions, including date and new function information.