Need help?Do you have a question about the Adlee Powertronic AS2-107 and is the answer not in the manual?
General safety and handling guidelines for the inverter.
Explanation of warning and caution symbols used in the manual.
Explanation of the inverter's model and specifications on the nameplate.
Detailed specifications for single-phase input inverter models.
Detailed specifications for three-phase input inverter models.
Visual representation of the inverter's physical dimensions (Fig 1).
Visual representation of the inverter's physical dimensions (Fig 2).
Visual representation of the inverter's physical dimensions (Fig 3).
Specifies environmental conditions for proper inverter installation.
Schematic showing connections for the main power circuit terminals.
Diagram illustrating the control circuit terminal connections.
Explains the purpose and function of each terminal.
Describes the function of each button on the operation panel.
Configuration for initial speed, acceleration, deceleration, and braking parameters.
Details on V/F patterns, torque boost, error records, and frequency jumps.
Settings for display, terminal functions, energy saving, and braking limits.
Parameters for version selection, S-curves, speed commands, and timers.
Configuration for overload protection, communication, and advanced timing.
Settings for power-on behavior, output signals, and terminal configurations.
Step-by-step guide for setting inverter functions and parameters.
How to use the control panel for operations like speed and standby.
Setting up and using RS485 for inverter communication.
Configuring terminal inputs for inverter control.
Sets durations for timer steps, unit selection, and stall prevention.
Explains errors detected by the inverter's internal diagnostics.
Lists and explains common operational errors and their causes.
Details on terminal control, range, logic, and parameter access errors.
Details on communication, thermal, load, and voltage errors.
Safety measures before performing maintenance procedures.
Guidelines for safe and effective inverter application.
Table correlating fault messages with causes and remedies.
Configuration for multistage speed control using external resistors.
Setup for basic run and jog operations via terminal control.
Configuration for three-stage speed control using variable resistors.
Setting up a master/slave configuration for coordinated control.
Factors to consider when determining the correct inverter capacity.
Details on selecting and connecting external braking resistors.
Schematic illustrating all terminal connections for the inverter.
Safety measures and general advice before performing maintenance.
Daily inspection items and methods for the inverter.
Periodic inspection items and methods for the inverter.
General| Brand | Adlee Powertronic |
|---|---|
| Model | AS2-107 |
| Category | Inverter |
| Language | English |
To Next Page