Advanced RF Technologies, Inc.
• Figure 5-3 Band Info Display
8.2.4 Power & Gain
This section displays the Input, Gain, and Output for both downlink and uplink.
• Figure 5-4 Power & Gain Display
Input [dBm] – Displays the in-band Downlink/Uplink signal level. The system will display “--.-“ when the input
level is < -90 dBm.
Outband [dBm] – Displays the out-band composite power.
Gain [dB]
User Set: Displays the amount of gain that the user set.
Actual: Displays the actual amount of gain that is currently in use.
Output [dB] – Displays the Downlink/Uplink composite output power levels. The system will display “--.-“, when
the output level is < +5 dBm.
To Next Page
Loading...
