Need help?Do you have a question about the ADRF SDR and is the answer not in the manual?
Key features and capabilities of the SDR repeater system.
List of components included with the SDR repeater system.
Visual overview of the SDR repeater's front and rear panel components.
Critical safety precautions regarding RF exposure and electrical hazards.
Information on compliance with FCC Class A digital device limits.
Requirements for FCC licensees and qualified installers for operation.
Industry Canada regulations for radio transmitters and antenna gain.
Safe operating distances and co-location restrictions for RF exposure.
Description of the NMS module and its LED indicators.
Ethernet, Host/Remote Switch, Power, Debug, and Communication ports.
Ports for external modem power and debugging on the NMS module.
Ports for connecting NMS to SDR modules via RJ-45 cables.
Powering the NMS and channel cards using NMS-PWR-OUT ports.
Connection point for the main AC power supply to the chassis.
Description of the RF module and its LED indicators.
Ports for connecting donor and server antennas to the RF module.
Location and operation of the RF module's AC power switch.
Connection for an external battery backup unit (ADRF-BBU).
Ports for NMS communication and master/slave switch settings.
Switch for selecting input voltage (115V or 230V) for the RF module.
Description of the various RF ports on the SDR-CHC.
Parameters and remarks for message board alarms.
Threshold values for various system, RF, and power alarms.
Wall, Rack, and SDR CHC mounting instructions.
Grounding, antenna separation, and line of sight guidelines.
Steps to connect a PC to the repeater using the Web-GUI.
Monitoring NMS status, navigation, summaries, messages, and contact info.
Status details for each specific module type.
Band, Power, Gain, Alarm, Message Board, and Install status parameters.
Control interface and summary for NMS, plus full system reboot/reset.
General, System, Heartbeat, Alarm Reporting, Gain, and Alarm settings for modules.
NMS setup, summary, location, modem, date/time settings.
SMR, PCS, BRS, Cellular, 700MHz, AWS installation, band, frequency table setup.
SNMP, Auto Installation settings for SMR, PCS, BRS, Cellular, 700MHz, AWS.
Creating, managing, and changing passwords for user accounts.
Closeout packages, user logs, firmware updates, backup, and logout.
Accessing technical support resources via the help tab.
Regular checks for connections, cables, and brackets.
Precautions for optimal operation and to prevent damage.
Standard warranty period and coverage details.
Limitations on remedies, damages, and product alterations.
Procedure for returning defective products for repair or replacement.
Detailed electrical and power parameters for the SDR system.
Mechanical dimensions, environmental conditions, and warranty details.
To Next Page
General