ADRF SDR - Maintenance and Operation; Periodic Inspection Checklist; Preventive Measures

Advanced RF Technologies, Inc.
73
6. MAINTENANCE GUIDE FOR SDR REPEATER
6.1 Periodic Inspection Checklist
 Check for loose connections between the repeater and antennas. If connections are loose, make sure that all
connections are tightly fastened properly.
 Cables and connectors are in good condition.
 Ensure that the repeater brackets are in good. condition and that the repeater is securely fastened
6.2 Preventive Measures for Optimal Operation
6.2.1 Recommendations
 Perform the Periodic Inspection Checklist quarterly or semi-annually.
6.2.2 Precautions
 Do not operate the repeater with the antennas in extremely close proximity to one another as this may cause
damage to the repeater.
 Do not change the parameters unless instructed to do so by an authorized supervisor.
 Do not move the repeater unless instructed to do so by an authorized supervisor.
 Do not detach any cables to the repeater unless repair of respective components is necessary.