Advanced RF Technologies, Inc.
Figure 64 Install- Frequency Table
5.4.2.3 Install- SNMP
Figure 65 Install - SNMP
The SNMP section allows you to specify the Site ID and Manager IP. The Site-ID is the code that is used to
identify a particular module. The Manager IP field is where the user inputs the IP address of the NOC system that is
being used to monitor the SNMP traps.
5.4.2.4 Install- Auto Installation
Figure 66 Install – Auto Installation
The Auto Installation routine can be run by clicking on the Install button. The Auto Installation routine runs
basic system checks to ensure proper functionality.
To Next Page
Loading...
