ADRF SDR - Install- 700 Mhz Band Selection; Install- Frequency Table

Advanced RF Technologies, Inc.
62
5.4.6.1 Install- 700 MHz Band Selection
Figure 86 Install- Cellular Band Selection
The selected preset bands will be highlighted in orange.
5.4.6.2 Install- Frequency Table
Figure 87 Install- Frequency Setting
By clicking on the Frequency Table button, the following screen will appear. You can use the frequency table as
a reference to set the desired bands. Clicking on the Back button will take you back to the previous page.
Figure 88 Install- Frequency Table