IRF2000 series - standard Doc v2.7 12
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
3.1 Safety instructions
To prevent damage to the device, all cable lines (power supply, interface cables) must
be only be connected while the device is switched off.
All installation work performed on the device must be performed only under safe,
secure and de-energised conditions.
Warning - hot surface
Protective gloves must be worn when handling devices with ambient temperatures
of 50 °C and higher.
Disregarding this warning can result in burn injuries or damage to property.
Recommendation for use:
Always adhere to the safety measures applicable when handling components at risk
of being damaged by electrostatic discharges. (DIN EN 61340-5-1 / DIN EN 61340-
5-2)
To Next Page
Loading...
Need help?
General
