Nero SoundTrax Working with Nero SoundTrax • 15
3. Choose the maximum noise level in the pauses between the tracks, by turning
the 'Silence Threshold' knob to the required number of decibels. Choose the
minimum duration of pauses between the tracks and tracks themselves by
entering a value in the corresponding field. Then click on the 'Detect' button to
divide the recording into different tracks using the settings you have selected.
4. Use the sliders to specify the level of the noise suppression filter (Denoiser),
the scratch removal filter (Declicker) and the crackle removal filter
(Decrackler). Click on the 'Preview' button to play the recording and see if you
are happy with the results.
To Next Page
Loading...
