Page 1 of 3
For a detailed review of the entire system, please view the BHS 4000A system manual.
Arm and Disarm
Arm:
• To arm in Away Mode, press the [On] button located on the system panel.
o
When the [On Light] begins to flash, the standard 80 second delay period has
begun.
o When the [On Light] becomes steady, the system is armed.
o To arm in Away Instant Mode, press the [ON] button, then press the [Instant]
button.
o
•
To arm in Stay Mode, press the [On] button, then press the [Motion Off] button.
•
To arm in Stay Instant Mode, press the [On] button, then the [Motion Off] button,
then
press the [Instant] button
.
Disarm:
▪ To disarm, enter your [security code] + [Cancel] within the 20 second delay period.
▪ The [On Light] will no longer be lit once the system is disarmed.
To Next Page
Need help?
General
