Page 2 of 3
Battery
• The BHS – 400A operates on a UB 1270 battery.
• Loss of AC power and use of backup battery power is indicated by NO AC.
• A low battery condition is indicated by BAT.
For instructions on replacing your battery, please visit our Battery Replacement Page.
Bypassing Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally
unarmed or to
access a protected area when the system is armed.
•
To bypass a zone, press the [Options] button until the display shows [Bypass, Enter
Zone #].
•
Enter the zone number you wish to bypass.
• The display will flash the zone number and show [Ready, Bypass].
• Press [On] to arm the system with zones bypassed.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound whenever a protected
door/window is opened.
•
To turn chime mode on, press the [Options] button until the window shows [Door
Chime].
• Enter your [security code] to select this option. The display window will show [Ready
Door Chime].
• To turn Chime mode off, press the [Cancel] button, otherwise it will turn off
automatically when the
system is turned on.
Reset
• To reset the system after an alarm event, first enter your [security code].
• Then, to view the event, press the [Options] button until the display shows [Alarm
Memory, Enter
Code] + your [security code].
To Next Page
Loading...
