QUICK CONSUMER
REFERENCE GUIDE
YOUR System: ADT Alarm Garda Response
Starting to use the PM30 Alarm Panel and Keypad
1
Setting Your System
Step 1
When leaving your home ensure that all protected doors/windows, including your
front door, are closed before setting your System.
Step 2
Set your System by:
Option 1:
The Keypad – by pressing the “set” key and presenting your KeyTag /or
entering your 4-Digit User Code.
Option 2:
The Alarm Panel – by pressing the “set” key on the Alarm Panel and entering
your 4-Digit User Code.
Step 3
You will hear a continuous beeping to remind you to leave the property via your
specied exit route. Your System will set only once the exit door is closed.
Step 4
The beeping stops and your System is now successfully set.
As a security feature, the status of your System is hidden from view
• To start using your System, push the “unset” key on your Alarm Panel and enter
your 4-Digit User Code or tap the screen on the Keypad.
• The Alarm Panel/ Keypad is now lit and you are ready to start using your System.
PM30 Control Panel
KeyTag
Touchscreen Keypad
To Next Page
Need help?
General
