ADT Garda Response PM30 - Recall Bypass

Recall Bypass
This Function to Removes (Recalls) the most recent Bypassed devices/zones.
Step 1
Close all doors (including your entry/exit door),
Press (Unlock)
Step 2
If the panel shows ‘Enter Code’ type in CODE
If the panel shows ‘Ready’ go to step 4.
Step 4
Press (Next)
Step 5
The display will show: ‘User Settings’
Step 6
Press (OK)
Step 7
Type in your CODE
Step 8
The display will show: ‘Set Zone Bypass’
Step 9
Press the (Next) until the display shows: ’Recall Bypass’
Step 10
The display will show: ‘<OK> to Recall’
Step 11
Press (OK)
Step 12
The display will show: ’Recall Bypass’
Step 13
To exit press the (Lock) and press (OK)
13