8
Deleting Code
Step 1
On the Main Panel press Open Padlock and enter your master code to exit
the screen saver
Step 2
Press Next
Step 3
The display will show: ‘User Settings’
Step 4
Press OK
Step 5
Type in your Code
Step 6
The display will show: ‘Set Zone Bypass’
Step 7
Press Next until you nd ‘User Codes’
Step 8
Press OK
Step 9
The display will show the ‘User 01 Code █‘,
Step 10
Press (Next) until you nd a user slot you want to delete (i.e. ‘User 02
Code █‘),
Step 11
Press OK
Step 12
The display will show: ‘User ## : ####’ (current code),
Step 13
Type in 0000 and press OK
Step 14
The display will show: ‘User 02 Code █‘,
Step 15
The code has now been deleted.
Step 16
You can delete more codes by repeating process from Step 10.
Step 17
To exit press the (locked padlock) and press OK
To Next Page
Loading...
Need help?
General
