11
Bypass Zone Continued
Step 12
Press (OK)
Step 13
The Display will Show:’<OK> To Bypass’
Step 14
Press OK
Step 15
The zone is now bypassed
Step 16
You can Bypass more zones by repeating process from Step 10
Step 17
To exit press the (Lock) and press (OK)
Review Bypass
This function allows a user to see all devices/zones that are currently disabled.
Step 1
Close all doors (including your entry/exit door),
Press (Unlock)
Step 2
If the panel shows ‘Enter Code’ type in CODE.
If the panel shows ‘Ready’ go to step 4.
Step 3
Press (Next)
Step 4
The display will show: ‘User Settings’
Step 5
Press (OK)
To Next Page
Loading...
