EasyManuals Logo

ADT EZ User Manual

ADT EZ
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
If an alarm occurs while you are at home:
The EZ Touchpad siren will sound and the red
ARMED
light will flash.
Proceed with caution! If you suspect that an intruder may still be in the premises, leave
immediately and call authorities from a neighbor's telephone.
To silence the alarm, insert your EZ-IFOB key into the IFOB slot on the EZ Touchpad and remove
when alarm has silenced.
The red
ARMED
light will continue to flash the number of the zone(s) on which the alarm occurred.
Determine which zone caused the alarm and then press
SILENCE
to clear the alarm memory.
If an alarm occurs while you are away:
When you unlock the deadbolt to enter, the EZ Touchpad sounder will activate and the red
ARMED
light will be flashing to warn you that an alarm had occurred while you were away.
Proceed with caution!
If you suspect that an intruder may still be on the premises, leave
immediately and call authorities from a neighbor's phone.
To disarm the system, you
must
insert your EZ-IFOB key into the EZ-IFOB slot on the EZ Touch-
pad. If the system is not disarmed in 30 seconds, the alarm will sound.
The red
ARMED
light will continue to flash the number of the zone(s) on which the alarm occurred.
Determine which zone caused the alarm and then press
SILENCE
to clear the alarm memory.
SILENCING AN ALARM
ARMED
ARMED
ARMED
ARMED

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADT EZ and is the answer not in the manual?

ADT EZ Specifications

General IconGeneral
BrandADT
ModelEZ
CategorySecurity System
LanguageEnglish

Related product manuals