Galaxy 8/18/60/500/512 11 User Guide
STATUS
The current status of the zone is displayed as circuit information, e.g.
Open or Closed. This information alternates with function informa-
tion.
DESCRIPTION
The zone description, if programmed, is displayed on the bottom line
of the display. The descriptor is assembled from alpha-numeric text
and describes the zone in detail, e.g. West Office Door.
SELECTING AND VIEWING
Selecting the DISPLAY ZONES option displays the first zone,
address 1001. Other zones can be viewed sequentially by using the
>A or <B keys. Zones can also be displayed by entering the address
of the zone: Galaxy 8 enter the zone number (1 digit); Galaxy 18 and
60 enter the RIO and zone number (2 digits); Galaxy 500 and 512
enter the line, RIO and zone number (4 digits). Press the # key to
display the zone resistance and RIO voltage.
ESCAPE
The esc key aborts the option and returns to the option menu.
DISPLAY LOG (User Level 4 and above)
PURPOSE
DISPLAY LOG provides the user with a means of viewing the
system history. Events are recorded in detail and stored in the non-
volatile memory.
SELECTING DISPLAY LOG
Enter the QUICK MENU. Press key 4 followed by the ent key.
Details of the most recent event to be logged are displayed.
EVENTS
The events available for display include details of setting, unsetting
and alarms. Each event is timed and date stamped.
SELECTING A DATE
Hold down one of the view keys, the dates held in the log are rapidly
stepped through. The A> key moves forward through the dates and
the <B moves backwards. Stopping at the required date reveals the
first event for that date.
1001 INTRUDER
COMPUTER ROOM
2+1
1021 SECURITY
CASHIER DOOR
esc
0 = OMIT ZONES
[ent] to Select
4
4 = DISPLAY LOG
[ent] to Select
ent
PIN + ent
LOG A12345678
Groups YY------
LOG A12345678
Groups NN------
1+2
ent
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
