Galaxy 8/18/60/500/512 23 User Guide
PIN WARNING
This option determines the number of days notification before the
expiry date of any user codes programmed as PIN Change. During
the notification period, the user is prompted to enter a new code on
entry of the expiring PIN. The default period is 99 days, with a
programmable range of 1 – 99. If a user does not assign a new code
by the end of the PIN Warning period, then the code is erased on the
next unsetting of the system.
NOTE: The PIN Warning ends on the last day of the month, the
PIN expires on the first day of the following month.
MAX USERS
This option is used to assign additional MAX users to the system
without allocating PINs, MAX users are only authorised to operate
the Access Control functions of the MAX modules.
Enter the Codes option and select 3 = MAX Users. Press the ent
key to display the first MAX user number (User 201). Each of the
users can be displayed using the A> and <B keys, or a specific user
can be selected by entering the required user number. When the
required code is displayed, press the ent key; to display 1 = MAX
Number.
MAX NUMBERS
The MAX number assigned to the MAX user identifies the card to
the system and references it to the MAX user.
Each MAX Number defaults to 0000000000 (ten zero’s):
1. Press and hold the B key until the zeros are deleted;
2. Enter the unique 10 digit number laser etched onto the MAX
card;
3. Press the ent key to save the programming and return to the
previous menu.
When a MAX number has been assigned to a MAX user number, a
solid box (n) is displayed on the top line of the MAX user number
details screen.
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
>A
PIN Warning
99 (1-99) days
ent
201 USER
A 1-------
CODES
2 = PIN Warning
CODES
3 = MAX Users
ent
0 = OMIT ZONES
[ent] to Select
ent
MAX Users
1 = Max No
Max No
0000000000
Ent Number
ent
ent
3
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
Need help?
General
