– 20 –
CHIME MODE
Using the
9 CHIME Key
This feature can be used
only while the burglary
system is disarmed.
Your system can be set to alert you to the opening of a perimeter door or window while it is
disarmed by using CHIME mode.
When activated, three tones will sound at the touchpad whenever a perimeter door or
window is opened. Interior zones will not produce a tone when they are activated.
Pressing the READY key will display the open protection points.
To turn Chime Mode on:
Enter the security code and press the CHIME [9] key. The CHIME message will appear.
To turn Chime Mode off:
Enter the security code and press the CHIME [9] key again. The CHIME message will
disappear.
TYPICAL DISPLAY WHEN CHIME IS ON
DISARMED CHIME
READY TO ARM
AC
CHIME
CUSTOM DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD
IN CHIME MODE, ANY OPEN PROTECTION POINTS WILL BE DISPLAYED
WHEN THE “READY” KEY IS PRESSED
FAULT 02
REAR DOOR
02
AC
NOT READY
CHIME
CUSTOM DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD
To Next Page
Loading...
Need help?
General
