EasyManuals Logo

ADT Safewatch Pro 2000 User Manual

ADT Safewatch Pro 2000
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
– 26 –
SECURITY CODES
To Add a User or
Change a User's
Code
Changing your
Master Code
Follow this procedure:
Enter your existing
Master code + [8] + [0][2]
+ new Master code + new
Master code again.
Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how
to use any system function they do not need to know, such as bypassing protection zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
CODE
1. + 8 Enter master code, then press CODE key.
(Master Code)
Example: 7 2 9 6
then press the CODE key.
2.
Enter user number. Enter the 2-digit User Number
(User Number)
(03-16) for the user you are adding or changing.
3.
Enter user's code.
(User's Code)
Enter the new 4-digit security code for that use
r.
CODE
To Delete a User
1. + 8 Enter master code, then press CODE key.
(Master Code)
Example: 7 2 9 6
then press the CODE key.
2. Enter user number.
(User Number)
Enter the 2-digit User Number (03-16) for the user whose
code you are deleting.
3. ----------- Stop.
Wait (about 3 seconds) until the touchpad beeps once
before pressing any other key. The code is automatically
deleted.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ADT Safewatch Pro 2000 and is the answer not in the manual?

ADT Safewatch Pro 2000 Specifications

General IconGeneral
BrandADT
ModelSafewatch Pro 2000
CategorySecurity System
LanguageEnglish

Related product manuals