– 13 –
CHECKING FOR OPEN ZONES
Using the
✱ READY Key
Before arming your system, all protected doors, windows and other protection zones
must be closed or bypassed (see
BYPASSING
PROTECTION
ZONES
section), otherwise
the touchpad will display a "Not Ready" message, and the READY indicator light on your
touchpad will not be lit. The READY key can be used to display all faulted zones, making it
easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [✱ ] key (do not enter
code first).
Secure or bypass the zones displayed before arming the system.
The the touchpad’s READY indicator light will come on when all protection zones have
been either closed or bypassed. The system can then be armed if desired.
READY
TO DISPLAY OPEN ZONES, PRESS THE ✱ KEY.
TYPICAL DISPLAYS
WHEN NOT READY TO ARM
DISARMED - PRESS ✱
TO SHOW FAULTS
CUSTOM DISPLAY TOUCHPAD
TYPICAL DISPLAYS
INDICATING OPEN PROTECTION ZONE
(AFTER PRESSING READY KEY)
FAULT 06
BEDROOM WINDOW
CUSTOM DISPLAY TOUCHPAD
TYPICAL DISPLAYS
INDICATING "READY TO ARM"
***
DI SARMED
***
READY TO ARM
CUSTOM DISPLAY TOUCHPAD
AC
NOT READY
06
AC
NOT READY
AC
ENGLISH DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD ENGLISH DISPLAY TOUCHPAD
“
NOT READY” DISAPPEARS AND THE
“READY” INDICATOR LIGHT COMES ON
To Next Page
Loading...
Need help?
General
