6\VWHP 2YHUYLHZ
Cabinet Hardware
1-22 Unimode 400 Installation PN 50710:A 10/22/97
$'7&$%$$&DELQHWV
$'7&$%$$
2YHUYLHZ
The ADT-CAB-400AA is a backbox and door that can contain a small Unimode 400
system. (A small system supports up to twelve NACs and consists of an ADT-CPU and
one option module, such as an ICM-4/ICE-4.) Modules mount to rails in the
ADT-CAB-400AA, eliminating the need for optional chassis assemblies. Mounting
methods include surface-mounting or semi-flush mounting on a wall between 16-inch-
on-center studs. Table 1-13 lists the components included in the ADT-CAB-400AA:
Table 1-13 ADT-CAB-400AA Components and Options
$'7&$%$$
/LPLWDWLRQV
• Limited power supply capacity (one AVPS-24 expander).
• The backbox can hold 12 amp-hour batteries only.
• Maximum of one module in addition to the ADT-CPU.
• No voice evacuation capability.
$'7&$%$$
'LPHQVLRQV
Figure 1-12 shows the ADT-CAB-400AA dimensions:
)LJXUH $'7&$%$$ %DFNER[ DQG 'RRU $VVHPEO\
Component Description
ADT-BE-400AA
ADT-BE-400AA
A package that includes an ADT-CPU-400,
an MPS-400RB, a transformer assembly, and a two-position
ADT-CPU-400 ribbon cable.
ADT-CAB-400AA
(includes ADT-DP-
400AA)
A backbox (14.5" wide by 17" tall by 5" deep) and door (14.57"
wide by 17.25" tall by 1.5 " deep).
ADT-DP-400AA An Inner Dress Panel for covering the backbox area surrounding
the modules. The ADT-DP-400AA is required for Canadian
installations.
BM-1 Blank module for covering an unused panel or module.
TR-500 Trim ring that provides for semi-flush mounting of the
ADT-CAB-400AA cabinet
To Next Page
Loading...
