ADTEK CS1-PR - User Manual

To Next Page

C1-01-1

7-2007-11-07

CS1-PR PROCESS Indicator

 DESCRIPTION

CS1-PR economic type Process Indicator has been designed

with high accuracy measurement, display and

communication of DC

signal 0~10V and 4(0)~20mA.

They are also available 1 option of 1 Relay outputs, 1

Analogue output or 1 RS485(Modbus RTU Mode) interface

with versatile functions such as control, alarm,

re-transmission or communication for a wide range of

industrial applications.

 FEATURE

● Measuring linear signal 0~10V and 0(4)~20mA in one indicator(input code: AV)

● Square Root function available by programming

● Option available 1 of 1 relay, 1 analogue output or RS485(Modbus RTU mode)

● 1 relay can be programmed individual to be a Hi / Lo / Hi Latch / Lo Latch energized with Start

Delay / Hysteresis / Energized & De-energized Delay functions.

● Analogue output or RS 485 communication port in option

● CE Approved & RoHS

 ORDERING INFORMATION

CS1−PR−

Input

Signal

−

Optional

Output

−

Excitation

Supply

−

Aux.

Powered

CODE

INPUT RANGE CODE OPTIONAL O/P CODE EXCIT. SUPPLY CODE AXU. POWER

0(4) ~ 20mA / 0 ~ 10mA

None

AC115/230V

0 ~ 10V / 0(1) ~ 5V

1 Relay

E24

DC 24V

0~10V/0(4)~20mA(all in one)

Specify

ADH*

AC/DC 85~264V

Specify A input

0(1) ~ 5 V

0 ~ 10 V

ADL*

AC/DC 20~90V

Specify V input

0 ~ 10 mA

0(4)~20 mA

* ADH* will be available

at Jan. 2008

RS 485

Relay, Analogue Output

or RS485 Port can be

selected one only.

Digital fine adjust: Pv.Zro: Settable range: -19999~+29999

 TECHNICAL SPECIFICATION

Pv.SPn: Settable range: -19999~+29999

Input

Readin

Stable Function

Input Range

Input

Impedance

Input Range

Input

Impedance

Average:

Settable range: 1~99 times

Voltage

0 ~ 10 V ≥ 1M ohm

Current

(

)

~20 m

250 ohm

Moving average:

Settable range: 1(None)~10 times

¾ The Meter can be 0~10V and 0~20mA in one unit

accordin

connection

#12

Digital filter:

Settable range: 0(None)/1~99 times

Calibration:

Digital calibration by front key

Control Functions(option)

A/D converter:

16 bits resolution

Set-points: One set-point

Accuracy:

≤± 0.04% of FS ± 1C;

Control relay: 1 Relay, FORM-C, 5A/230Vac, 10A/115V

Sampling rate:

15 cycles/sec

Relay energized mode: Energized levels compare with set-points:

Response Time:

≤100 msec.(when the AvG = “1”) in standard

Hi / Lo / Hi.HLd / Lo.HLd programmable

Input type:

0~10V / 0~5V / 1~5V / 0-10mA / 0~20mA / 4~20mA

Energizing functions: Start delay / Energized & De-energized delay / Hysteresis

programmable for coding AV(option)

Energized Latch

Start band(Minimum level for Energizing): 0~9999counts

Display & Functions

Start delay time: 0:00.0~9(Minutes):59.9(Second)

LED:

Numeric: 5 digits, 0.8”(20.0mm)H red high-brightness LED

Energized delay time: 0.00.0~9(Minutes):59.9(Second)

Relay output indication: 1 square red LED

De-energized delay time: 0.00.0~9(Minutes):59.9(Second)

RS 485 communication: 1 square orange LED

Hysteresis: 0~5000 counts

E.C.I. function indication: 1 square green LED

Max/Mini Hold indication: 2 square orange LED

Analogue output(option)

Down key function indication(Reset for Max.(Mini.) Hold /

Accuracy: ≤

0.1% of F.S.;

PV Hold / Rel. PV): 1 square green LED

Ripple: ≤

0.1% of F.S.

Display range:

-19999~29999;

Response time: ≤100 msec. (10~90% of input)

Scaling function:

Lo.SC: Low Scale; Settable range: -19999~+29999

Isolation: AC 2.0 KV between input and output

Hi.SC: High Scale; Settable range: -19999~+29999

Output range: Specify either Voltage or Current output in ordering

Decimal point:

Programmable from 0 / 0.0 / 0.00 / 0.000 / 0.0000

Voltage: 0~5V / 0~10V / 1~5V programmable

Over range indication:

ovFL, when input is over 120% of input range Hi

Current: 0~10mA / 0~20mA / 4~20mA programmable

Under range indication:

-ovFL, when input is under -20% of input range Lo

Output capability:

Voltage: 0~10V: ≥ 1000Ω;

Max / Mini recording:

Maximum and Minimum value storage during power on.

Current: 4(0)~20mA: ≤ 600Ω max

Display functions:

PV / Max(Mini) Hold / RS 485 Programmable

Functions: Ao.HS(output range high): Settable range: -19999~29999

Front key functions:

Relative PV / PV Hold / Reset for maxi(mini) hold /

Ao.LS(output range Low): Settable range: -19999~29999

Reset for relay energized latch programmable

Digital fine adjust:

Ao.Zro: Settable range: -38011~+27524

Low cut:

Settable range: -19999~29999 counts

Ao.SPn: Settable range: -38011~+27524

Excitation Supply DC24V in build for 2 wire transmitters

CSM-321S

CS2-

CSM-321S CSM-CSM-

CS1-PR

CSM-321S CSM-CSM-

CSM-321S CSM-

CSM-321S

OPTION 4

* It means RoHS

version.

OPTION

Brand	ADTEK
Model	CS1-PR
Category	Measuring Instruments
Language	English

ADTEK CS1-PR - User Manual

Table of Contents

ADTEK CS1-PR Specifications

Related product manuals