19
Connecting the earhook to the sound processor
There are three earhook options for the Naída CI M90 sound processor: the M T-Mic,
the M Earhook, and the M Acoustic Earhook.
Beginning with the earhook disconnected, align the earhook flush with the sound
processor. Hold the earhook firmly at the top and push towards the sound processor
until it meets flush with the sound processor.
Using the provided pin removal tool, place one of the pins in the small hole on the
side of the tool. This will help to steady the pin as you line it up with the pin hole on
the earhook.
To Next Page
Loading...
