568
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by
VEHICLE SELECTION
MITSUBISHI
NISSAN
SUZUKI
> TOYOTA
V.W./AUDI GROUP
VEHICLE SELECTION
Immobilizer
> REMOTE
PROXIMITY
VEHICLE SELECTION
TYPE 1
TYPE 2
TYPE 3
> TYPE 4
ECU IDENTIFICATION
TOYOTA TYPE 4
PRESS ENTER KEY
SWITCH IGNITION ON
PRESS ENTER KEY
DIAGNOSTIC MENU
ECU IDENTIFICATION
> SPECIAL FUNCTIONS
DIAGNOSTIC MENU
ERASE REMOTES
> PROGRAM REMOTE
PROGRAM REMOTE
PRESS LOCK & UNLOCK
TOGETHER FOR 4 Sec.
PRESS UNLOCK BUTTON
FOR 1 SEC
BACK’ TO EXIT
PROGRAM REMOTE
PROCEDURE COMPLETE
PRESS ENTER KEY
Note: Press the Lock & Unlock
buttons together for 4 seconds
and quickly press Unlock button
for 1 second. You must be fast
on the button operation.
PRESS the BACK BUT-
TON to COMPLETE THE
PROGRAMMING.
PROGRAM REMOTE - TYPE 4
PROGRAM REMOTE
SYSTEM WILL BEEP
WHEN COMPLETE
PRESS ENTER KEY
(Use this method to program the Remote portion of remote head keys
on G KEY System Toyota’s)
Even though the transponder programs with Immo TYPE 5 we use TYPE 4
on the Remotes Menu for the Remote Programming.
The RKE program separate from
the transponder on TOYOTA G
chip remote head keys.
TOYOTA 2011 - REMOTES
Be careful when programming remote head
keys there are several different FCC ID’s for the
remote components. They are not interchange-
able and must be correct for the vehicle you are
working on.
A prudent tip for doing these is to
Program in the remote portion BEFORE cutting
the blade. Use another key or a metal work key
to turn the ignition ON during the procedure.
MVP &
TCODE
ADVANCED DIAGNOSTICS USA
powered
by
PRIUS ‘04-’09
MVP &
TCODE
TOYOTA
ADVANCED DIAGNOSTICS USA
powered
by
To Next Page
Loading...
