Advanced Elements STRAITEDGE ANGLER PRO - Page 11

StraitEdge
TM
Angler PRO Inatable Kayak Owner’s Manual
11
Valve Base: This part is
permanently attached to the
air bladder
PR Valve: The spring-loaded
center is located at the bottom
of the threaded section
prevent the PR valve from working properly. To maintain optimal performance in all conditions,
it is recommended that the PR valve be removed and cleaned periodically to ensure proper
function.
To Properly Maintain your PR Valve:
1. Deate the air-chamber that the PR valve is attached to (e.g. the inatable oor). Unscrew the
PR valve from its base by hand, turning it counter-clockwise.
2. Once removed, place the PR valve in a cup of warm soapy water for 5 minutes.
3. While submerged in the cup of water, depress the white spring-loaded center of the valve to
dislodge any sand or grit.
4. Remove from water, dry with a cloth and reattach to the valve base by screwing in clockwise.