Advantage S-150 - Troubleshooting

To Next Page

To Previous Page

Trouble Shooting

Problem Cause

Solution

No sound

! Mains switch not on , mains

connection not correctly

attached .

! S-150 is in Standby mode.

! S-150 is in Protection mode.

! A fuse is blown..

! Check the power cord and

the mains switch.

! Push Standby.

! 1.)

! 2.)

! Contact your dealer.

One channel is

inoperative.

! The Loudspeakers are not

correctly connected or

damaged.

! Defective hookup cables,

not correclty attached or

damaged.

! Check the Loudspeakers and

the connections.

! Check the hookup cables.

! Check your preamp/source..

! Contact your dealer.

Diffuse, weak bass/ weak

stereo image.

! The Loudspeakers are

connected off phase.

! Check the Loudspeakers

and connections..

! Contact your dealer.

1.)If the LED starts to flash during operation it means most likely that the S-150 is

overheated. Try turning the master switch off for a while and then turn it back on.

In the event of a fuse failure, locate the fuse access hatch under the AC mains plug.

Replace the fuse only with the exact type originally provided with the S-150.

2.)

Substitution of

a larger fuse will void your warranty.

ADVANTAGE