Chapter 4 Command Set 4-5
Chapter 4
Command Syntax Command Name Command Description Page No.
@AADI Read Digital I/O and
Alarm Status
The addressed module returns the
state of its digital input channel, its
two digital output channels and the
status of its alarm
4 104
@AADO(data) Set Digital Output Set the values of the module’stwo
digital outputs (ON or OFF)
4 106
@AAEAT Enable Alarm Enables the alarm in either Momentary
or Latching mode
4 108
@AAHI(data) Set High Alarm Downloads the High alarm limit value 4 110
@AALO(data) Set Low Alarm Downloads the Low alarm limit value 4 111
@AADA Disable Alarm Disables all alarm functions 4 112
@AACA Clear Latch Alarm The latch alarm is reset 4 113
@AARH Read High Alarm The addressed analog input module is
asked to return its high alarm value
4 114
@AARL Read Low Alarm The addressed analog input module is
asked to return its low alarm value
4 115
@AARE Read Event Counter The addressed module is asked to
return its event counter value
4 116
@AACE Clear Event Counter The event counter is set to 0 4 117
To Next Page
Loading...
Need help?
General
